Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dumps65

DumpsWrap Logo

HP HPE2-T37 Dumps

Page: 1 / 12
Total 115 questions
Get HPE2-T37 Full Access Download HPE2-T37 PDF

Using HPE OneView Questions and Answers

Question 1

Which operation can be performed using HPE OneView for VMware vCenter Server?

Options:

A.

Remove a new node from an existing cluster

B.

Create a new VMware cluster within vCenter Server

C.

Configure VMware cluster properties tor HA and DRS

D.

Create a new distributed switch for cluster connectivity

Question 2

You are deploying HPE OneView to manage a customer's HPE ProLiant servers

Is this statement about appliance availability true?

Options:

A.

HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster

B.

HPE OneView has a built-in HA feature that can be activated with an additional license

C.

HPE OneView availability relies on HA features provoed by the hypervisor

D.

During hpe oneView deployment customer may select configure proprietary HA mode.

Question 3

Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.

as

Options:

Question 4

A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?

Options:

A.

Boot volumes can be created on demand and defined in the server profile template.

B.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

C.

An existing volume can be replicated automatically when creating a server profile.

D.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

Question 5

After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?

Options:

A.

IL0 firmware of the replacement server is different than firmware in broken server.

B.

Server profile affinity is configured to Device Day + server hardware.

C.

The enclosure group has to be updated to match the original enclosure group.

D.

The replacement server has more memory or CPUs than broken machine.

Question 6

For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.

as

Options:

Question 7

as

Which statement about the volume template is true?

Options:

A.

Users will be able to change sharing type and volume capacity

B.

A volume created using this template will not support deduplication

C.

A volume created using this template mil not support snapshots

D.

Users will be able to select storage pool during volume creation

Question 8

Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

as

Options:

Question 9

Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?

Options:

A.

BIOS management

B.

Workload profile

C.

Boot from SAN

D.

Secure boot

Question 10

How will setting the Purpose field within the network definition of a server profile impact the network traffic?

Options:

A.

network purpose can give higher priority for a specific type of traffic

B.

network purpose will impact the traffic only if Virtual Connect modules are used

C.

network purpose will define QoS within Logical Interconnect

D.

network purpose does not affect the behavior of the network

Question 11

How is HPE Storage Integration Pack for VMware vCenter deployed?

Options:

A.

It is deployed as an agent on any supported and managed array.

B.

It |i deployed as a virtual appliance to the supported hypervisor.

C.

It is the part of the standard HPE OneView appliance, but it must be activated.

D.

It is deployed as an application on Windows system running in the virtual machine.

Question 12

Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

Options:

A.

It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.

B.

It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.

C.

It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.

D.

It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.

Question 13

Which platform is supported for HPE OneView appliance deployment?

Options:

A.

Citrix XenServer

B.

Microsoft Hyper-V

C.

Oracle VM Virtual Box

D.

VMware Tanzu

Question 14

Your customer has HPE ProLiant servers deployed and managed using HPE OneView. They plan to add a few HPE Synergy frames to support if realization workload. They plan to manage HPE Synergy frames using HPE OneView.

Which statement about this environment is true?

Options:

A.

HPE Synergy frames are managed using HPE Composer 2, which is running an embedded HPE OneView instance.

B.

HPE Synergy frames can be added to an HPE OneView appliance, if they are running HO 6 or iL0 5.

C.

HPE Synergy frames are managed using a Rack Management Controller, not an HPE OneView instance.

D.

HPE Synergy frames can be added to the HPE OneView appliance, used to manage the HPE ProLiant servers.

Question 15

Refer to the exhibit.

as

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?

Options:

A.

The refresh procedure must be performed on each logical enclosure to refresh firmware.

B.

All of the components are up to date and compliant with firmware baseline.

C.

The firmware repository service must be restarted using maintenance connection.

D.

The firmware repository is not defined within firmware compliance report.

Question 16

You want to enable HPE Remote Support within HPE OneView.

Which servers will be covered with HPE Remote Support once enabled?

Options:

A.

Only HPE Synergy Compute Modules with a server profile applied.

B.

Any Gen8, Gen9 and Gen10 servers managed using HPE OneView.

C.

Any servers under warranty or active service contract.

D.

Any server except HPE Superdome Flex and HPE Superdome Flex 280.

Question 17

Which statement regarding HPE GreenLake for Compute Ops Management - OneView Edition requirements is true?

Options:

A.

It supports HPE OneView instances from version 8.40 or newer.

B.

It can be used tree of charge for the HPE Synergy platform because the licenses are included.

C.

It is available for customers that have more than three HPE Synergy Frames.

D.

It supports HPE ProLiant G6 and newer systems regardless of the OS installed.

Question 18

Which location type can be selected when creating a remote schedule backup?

Options:

A.

SFTP

B.

NFS

C.

FTP

D.

CIFS

Question 19

Which statement about server hardware types is true?

Options:

A.

Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

B.

Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems

C.

Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination

D.

The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

Question 20

You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.

What can be done to fix this issue?

Options:

A.

The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.

B.

The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.

C.

Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.

D.

Ensure that the Link Aggregation Group time-out value matches the server set values.

Question 21

What is a network set?

Options:

A.

It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.

B.

It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.

C.

It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.

D.

It is a collection of all networks configured within HPE OneView regardless of network type.

Question 22

Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?

Options:

A.

HPE One View Global Dashboard license

B.

HPE OneView Advanced license

C.

HPE composer 2 license

D.

HPE OneView standard license

Question 23

Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)

Options:

A.

SCP

B.

HTTPS

C.

SFTP

D.

HTTP

E.

FTP

Question 24

You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?

Options:

A.

A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

B.

A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

C.

An external repository must be created, because standalone components are supported only In an external repository.

D.

ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.

Question 25

Refer to the exhibit.

as

You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?

Options:

A.

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

B.

HPE OneView was restored from a backup that created inconsistency with the server profile template.

C.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

D.

Changes to the server profile were implemented directly on the server profile.

Question 26

Refer to the exhibit.

as

Which statement about server connections is true?

Options:

A.

LACP on downlinks is configured for Ethernet connection

B.

All connections within the server profile are using physical IDs

C.

Ethernet connection is configured to boot from PXE

D.

Storage array is connected directly to an HPE Synergy frame

Question 27

Your customer has tried to delete a volume using HPE OneView interface, but the operation has failed. Which of the following statements would cause the operation to fail?

Options:

A.

This volume is presented to the server.

B.

This volume is marked as permanent.

C.

This volume has at least one snapshot created.

D.

This volume is rebuilding after the drive failure.

Question 28

You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?

Options:

A.

Logical Enclosure

B.

Logical Interconnect Group

C.

Logical Interconnect

D.

Server Profile

Question 29

You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.

Click the appropriate configuration option.

as

Options:

Question 30

Which of the following actions from the HPE OneView interface is available for a volume provisioned on an external array?

Options:

A.

Shrinking a volume

B.

Volume conversion

C.

Remote replication

D.

Growing a volume

Question 31

Refer to the exhibit.

as

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

Options:

A.

The other networks are not configured with the required Smart Link parameter.

B.

The other networks are not added to the Logical Interconnect Group configuration.

C.

The other networks have Private Network' selected, which hides them from Compute Modules.

D.

The other networks are configured with a purpose other than General or Management.

Question 32

Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?

Options:

A.

HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.

B.

HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

C.

Not all of the features will be available for HPE ProLiant G7 systems.

D.

HPE ProLiant Gen 10 servers do not need an HPE OneView license.

Question 33

What is required to add remote frame link topology to HPE OneView?

Options:

A.

The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.

B.

The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.

C.

Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.

D.

Management ports of the remote frame link topology must be connected to the management LAN.

Question 34

Which statement about a logical enclosure support dump is true?

Options:

A.

The support dump file can be encrypted to secure it's content when sending through internet.

B.

The support dump can be created when logical enclosure is in a maintenance state.

C.

The support dump can be only created by an HPE Support engineer.

D.

The support dump is sent automatically to HPE support once per week.

Load More HPE2-T37 Questions
Page: 1 / 12
Total 115 questions
Get HPE2-T37 Full Access Download HPE2-T37 PDF