HCS-5G RAN V1.0 Questions and Answers
To delete the original default data before configuring gNodeB, you need to complete the initialization of the base station configuration.
The maximum transmit power of NRDUCELTRP in the gNode configuration is BBU RF power.
In the scenario of NSA networking, gNodeB's S1-U interface is self-built, which objects are unnecessary?
Which of the following signals reflects the coverage of the NR network uplink?
The transmitted data in the initial data configuration of gNodeB has a strong coupling relationship with the wireless data.
CU/DU is set together, CU logical nodes and DU logical nodes will be added on the same BBU5900.
Only the 60kHz subcarrier bandwidth supports the configuration of extended CPs.
Regarding the description of NSA networking, which of the following is wrong?
Compared to BBU5900 and 3910, which slot has not changed the actual position of the slot number?
Which of the following objects cannot be blocked with BLK?
Which of the following half-width 5G baseband boards are supported by the BBU5900 in the V100R015 version?
gNodeB implements X2 self-configuration via MME.
In the 5G network test, what is the recommended test distance between the CPE and the gNB on the terminal side?
What compression ratios are supported by the CPRI port of 5G RAN2.1 gNodeB?
In the NSA core network selection solution, which solution is generally not recommended for commercial networks?
In order to support the NSA DC feature on the base station, which of the following options need to be configured?
Which of the following requirements is generally included in the target rate of urban areas in eMBB scenarios of 5G?
What are the interfaces that can be used for the IPPM function?
When using multimode fiber to connect BBU and AAU, the distance should not exceed how many meters?
In the process of automatically obtaining an IP address through DHCP, what message information is involved in gNodeB?
What are the following layer two protocol of the 5G air interface control plane? (Multiple Choice)
In general, which of the following base station equipment commissioning methods causes the longest DownTime?
The rate mode of the gNodeB Ethernet port needs to be consistent with the docking interface.
How many DC power outputs can the DCDU-12B provide?
The transmitted DSCP value indicates the differential service code priority, the larger the value, the higher the priority.
gNodeB binds the operator ID when adding tracking area information.
The calculation formula of the absolute frequency point of the gNodeB cell is similar to that of LTE, and the value of △F is also the same.
In the NSA network, if each gNodeB is assigned two logical IP addresses, it is recommended that S1-u use the same 1P address as which of the following?
100Mhz, 64T64 cell recommended to configure how much eCPRI connection bandwidth?
NR is divided into competitive and non-competitive random access, what is the main purpose of UE triggering random access?
The CPE Pro admin page supports multiple users logging in at the same time.
In 5G base stations, which of the following is correctly interpreted regarding the ".ecf" suffix?
