IBM C1000-132 Dumps

In IBM Maximo Manage v8.0 implementation, if you add additional attributes to the Work View and want them to be automatically updated from changes made to corresponding Ticket and Work Order fields, you can modify the existing Crossover Domains TKT2WV or W02WV. Crossover Domains define a mapping between fields on two different objects, allowing data to be synchronized between them.

To associate a Master Preventive Maintenance record with multiple non-rotating assets, we can add the assets to the Multiple Assets table on the Master Preventive Maintenance record. This allows us to associate the preventive maintenance schedule with multiple assets, ensuring that the maintenance activities are performed on each of the associated assets as scheduled.

.

In IBM Maximo Manage v8.0, Service Request Categories for the Service Request Work Center can be created in the Administration Work Center and through the Classifications Application:

Administration Work Center: The Service Request Configuration section within the Administration Work Center enables administrators to set up and customize service request categories specifically for use in the Service Request Work Center. This involves defining properties, categories, and issues users select when creating service requests​

​

Classifications Application: Categories are also managed by setting up classifications associated with service requests in the Classifications application. When a classification is created with associations to the "Asset" and "SR" (Service Request) objects, it becomes available as a category option in the Service Request tool. This approach allows issues to be assigned to specific categories using ticket templates tied to classifications​

​

These configurations provide a structured way to set up service categories that enhance service request management by ensuring users select relevant, predefined options during request creation.

In the Work Order Tracking application, when a Work Order is generated from a Preventive Maintenance (PM) record, the target finish date is calculated as the Work Order target start date + the Job Plan duration.

 Regarding Master Preventative Maintenance (PM) records in IBM Maximo Manage, associated PM records can be created for a Master PM which does not have an item.

In IBM Maximo Manage, the Action Limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type.

the budget amounts in the Budget Monitoring application are entered at the Budget Line level. A Budget Line represents a specific account or category within a budget and allows for detailed tracking and analysis of budget data.

Locations, assets and storerooms are defined at the Site level in IBM Maximo Manage.

The Graphical Scheduling application in Maximo Manage v8.0 uses histograms to provide a visual representation of resource allocation. To generate these histograms for work orders, it relies on the following information:  

Craft Quantity: This refers to the number of personnel from a specific craft (e.g., electricians, mechanics) required to complete the work order.

Hours: This represents the total number of hours that the specified craft is needed for the work order.

By combining these two pieces of information, the histogram displays the overall workload demand for each craft across the scheduled work orders. This allows schedulers to:

Identify potential resource bottlenecks: See if there are periods where the demand for a particular craft exceeds its availability.  

Optimize resource allocation: Allocate crafts effectively to ensure that enough personnel are available to complete the work within the scheduled timeframe.

Balance workloads: Distribute work among crafts to avoid overloading specific teams. (Reference: IBM Maximo Manage v8.0 documentation - Graphical Scheduling application)

Three integration End Points Handlers available in Maximo Manage are XMLFILE, EMAIL and FLATFILE.

In IBM Maximo Manage v8.0 implementation, the priority order for selecting a Safety Plan when a Job Plan is applied to a Work Order is:

Use the Safety Plan associated with the Asset referenced on the Work Order.

Use the Safety Plan associated with the Location referenced on the Work Order.

Use the Safety Plan associated with the Asset's Rotating Item, for the Asset referenced on the Work Order.

Use the Safety Plan associated with the Location's Rotating Item, for the Location referenced on the Work Order.

This ensures that the appropriate Safety Plan is applied to the Work Order based on the relevant Asset and Location information. If a Safety Plan is not associated with either the Asset or Location referenced on the Work Order, the Safety Plan associated with the Asset's Rotating Item or the Location's Rotating Item may be used as a fallback option. This helps to ensure that worker safety is prioritized and that appropriate precautions are taken when performing work tasks.

In the IBM Maximo Manage Inventory Work Center, a pick list starts with a status of "Entered." To change this status to "In Progress," certain actions need to be performed on the items within the pick list. The following actions trigger the transition from "Entered" to "In Progress":

Picked: When items on the pick list are marked as "Picked," it signals that the inventory has been gathered and is ready for further processing. This action moves the pick list status to "In Progress"​

​

Staged: Staging items on the pick list moves them to an intermediate location or prepares them for issuance. Moving items to this state changes the pick list status to "In Progress" as well​

Issued: Issuing items from the pick list directly fulfills the reservation and removes the inventory from the system. This also updates the pick list status to "In Progress" as it reflects the inventory movement out of storage​

​

Thus, actions A (Picked), D (Issued), and E (Staged) are the correct answers, as they all cause the pick list to shift from "Entered" to "In Progress."

In IBM Maximo Manage, if a Purchase Order is not being revised, two statuses that will allow a receipt of new items to be processed in the Receiving application are APPR and INPRG.

When using flow control on a Work Order in IBM Maximo Manage, to ensure that Work Order status changes are inherited from the Parent to Child Work Orders, you should go to the Organization application and check the Inherit Status Changes flag in Work Order Options -> Flow Control Options.

In IBM Maximo, only one failure report can be created per work order. This failure report captures details about the issues encountered, including the failure class, problem, cause, and remedy codes. It is recorded in the Failure Reporting tab within the Work Order Tracking or Quick Reporting applications, and is designed to provide a structured report on the failure encountered for the specified work order​

​

​

While Maximo allows for multiple failure details to be reported across different work orders, each individual work order is limited to a single failure report. Tasks or child work orders associated with the main work order do not support additional, separate failure reports for each task; instead, the primary work order holds the single comprehensive report.

In IBM Maximo Manage, two records that can be included as a contract line item on a Lease/Rental Contract are a Rotating item and an Asset.

In IBM Maximo Manage, when the same work tasks need to be applied simultaneously to multiple assets, the recommended method is to use the Multiple Assets, Locations, and CIs table on a single Work Order. This approach allows users to specify multiple assets for the work order without creating separate child work orders or task hierarchies, streamlining record management and reducing complexity.

Multiple Assets, Locations and CIs Table: This table allows the user to list all assets requiring the same work on a single work order. When tasks are defined on the work order, they apply uniformly across all assets listed in this table. This method is efficient for routine inspections, simple tasks, or other repetitive maintenance where the same task applies to multiple assets​

​

​

Routes as an Alternative: A route could also be configured so that each route stop (representing different assets or locations) populates the Multiple Assets, Locations, and CIs table on a single work order when applied. This allows for sequence control and record management while still using a single main work order​

This setup minimizes the need to manage multiple child work orders or complex work order hierarchies, particularly when performing similar tasks on several assets simultaneously.

In the Organizations application in IBM Maximo Manage, you should use Reservation Options to create Inventory Usage documents for new reservations.

Apart from Standard and Average costing methods in IBM Maximo Manage’s Inventory application, three other costing methods that can be used are FIFO (First In First Out), LIFO (Last In First Out) and Weighted Average.

In the Safety Plans application, a Work Asset is either a location or an asset that requires the safety plan. Each safety plan record must have at least one work asset specified, and the work asset can be a location or an asset.

The three default classes of a Ticket in IBM Maximo Manage are Problem, Service Request and Incident.