SUSE sca_sles15 Dumps

The program systemd is the process with process ID 1. It is responsible for initializing the system in the required way. systemd is started directly by the kernel and resists signal 9, which normally terminates processes. All other programs are either started directly by systemd or by one of its child processes.

Systemd is the first process that is started by the kernel during boot. It has the process ID of 1. It is responsible for initializing and managing other processes and services on the system. References:

To access updates for SLE, you need an account with SUSE Customer Center and a SLE Product Key. SUSE Customer Center is a web portal that allows you to manage your subscriptions, products, and services from SUSE. A SLE Product Key is a unique code that activates your subscription and entitles you to receive updates and support for your SLE product. You can register your product key with your SUSE Customer Center account and assign it to your system. References:

The /etc/fstab file contains information about file systems that need to be mounted at boot time or on demand. It specifies the device name, mount point, file system type, mount options, dump frequency, and fsck order for each file system. References:

Assuming the default value for umask, which is 022, the permissions on new files would be set to 644 and the permissions on new directories would be set to 755. The umask value is subtracted from the base permissions of 666 for files and 777 for directories to determine the actual permissions. For example, 666 - 022 = 644 for files and 777 - 022 = 755 for directories. References:

Firewalld uses two separated configuration sets, runtime, and permanent configuration.

The runtime configuration is the actual running configuration and it is not persistent on reboots. When the firewalld service starts it loads the permanent configuration which becomes the runtime configuration.

.

Firewalld maintains two separate configurations: runtime and permanent. The runtime configuration is the current state of the firewall that is applied to the system. It can be changed by various commands and tools without affecting the permanent configuration. The permanent configuration is the persistent state of the firewall that is stored in configuration files. It can be changed by various commands and tools with the --permanent option. The permanent configuration will take effect after reloading firewalld or rebooting the system. References:

The UID that the root user has is 0. The UID (user ID) is a numeric value that uniquely identifies a user on the system. The root user is the superuser or administrator who has full privileges and access to all files and commands on the system. The root user always has the UID of 0, regardless of its name or password. References:

The commands that can be used to terminate processes are kill and killall. The kill command can be used to send a signal to a process specified by its process ID (PID). The default signal is SIGTERM, which requests a graceful termination of the process. The killall command can be used to send a signal to one or more processes specified by their name. It will match all processes that belong to the current user unless otherwise specified. References:

The commands that can display the groups of which a user is a member are groups and id. The groups command will print the names of all primary and secondary groups that a user belongs to. If no user name is specified, it will print the groups for the current user. The id command will print various information about a user’s identity, such as user ID (UID), group ID (GID), primary group name, secondary group names, etc. References:

The command that you would run to create an updated initial file system, if your server hardware requires additional drivers to be available for the kernel at boot up, is mkinitrd. This command will create or update the initrd file in /boot based on the current kernel and configuration files. The initrd file is an initial ramdisk image that contains the necessary drivers and tools to mount the root file system and start the boot process. References:

If you are setting up a SLES 15 server that will require very large data volumes and journaling capabilities, the best choice for your data volumes is XFS. XFS is a high-performance and scalable file system that supports large files and file systems, online defragmentation and resizing, metadata checksums, and other features. XFS also provides journaling capabilities that ensure data consistency and integrity in case of system crashes or power failures. XFS is the default file system for data partitions in SLES 15. References:

The command that will take a foreground process and suspend it, and then place it in the background as a stopped job is Ctrl+Z. This keyboard shortcut will send a SIGTSTP signal to the foreground process group, which will stop its execution and return control to the shell. The shell will then display the job number and status of the stopped process. To resume the process in the background, you can use the bg command with the job number or % sign. References:

l_node/Bash-Startup-Files.html

When Bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable. The --noprofile option may be used when the shell is started to inhibit this behavior.

The first file executed by a bash login shell is /etc/profile. This file sets global environment variables and aliases for all users. It may also source other files in /etc/profile.d/ directory. References:

The command that is used to ensure an ext3 file system is checked every 50 times it is mounted is tune2fs. The tune2fs command can be used to adjust various parameters of an ext2, ext3, or ext4 file system. The -c option can be used to set the maximum number of mounts between two file system checks. For example, tune2fs -c 50 /dev/sda1 will set the check interval to 50 mounts for /dev/sda1. References:

To restrict access to your server via SSH to just a few specific users, you need to modify the AllowUsers option in the /etc/ssh/sshd_config file. This option specifies a list of user names or patterns that are allowed to log in via SSH. Any user name that does not match the list will be denied access. You need to restart the sshd service for the changes to take effect. References:

The statements that are true regarding a daemon are:

• A daemon will wait for some event to occur to trigger action on the part of the daemon.
• A daemon process is launched by the system.
• A daemon process is not associated with a terminal or a graphical environment.

A daemon is a background process that performs a specific service or task without user interaction. It usually starts at system boot and runs until the system shuts down. It does not have a controlling terminal or a graphical interface, and it often runs as root or a dedicated user. A daemon responds to events such as network requests, signals, timers, etc. References:

The name of the system logging facility in SUSE Linux Enterprise is syslog-ng. It is a flexible and scalable implementation of the syslog protocol that can handle various types of log messages from different sources and destinations. References:

The openSUSE Leap version of Linux is designed for desktop power users and developers. It is a community-driven distribution that offers a stable and reliable operating system with cutting-edge software and tools. It is suitable for personal use, development, testing, and experimentation. It is not intended for high-availability or data center environments that require enterprise-level support and security. References:

When using the nice command, -15 is the higher priority than 7. The nice command can be used to run a process with a modified scheduling priority. The priority value ranges from -20 (highest priority) to 19 (lowest priority). The default priority is 0. Only root can assign negative priority values to processes. References:

The basic components of RPM are RPM Database and RPM Package Manager. The RPM Database is a collection of files that store information about installed packages on the system. It is located in /var/lib/rpm by default. The RPM Package Manager is a set of tools and libraries that allow you to install, uninstall, query, verify, and manage RPM packages. It includes commands such as rpm, zypper, yast2, etc. References:

For programs to leverage PolKit they are split into two separate processes. The statements below that are true regarding these two PolKit processes are:

• The Mechanism process runs in the System Context.
• The Policy Agent process runs in the User Session.

The Mechanism process is responsible for performing privileged actions on behalf of unprivileged users. It runs as root in the System Context and communicates with PolKit via D-Bus. The Policy Agent process is responsible for requesting authorization from users when they attempt to perform privileged actions. It runs as a normal user in the User Session and communicates with PolKit via D-Bus. References:

The scripts in the /etc/grub.d directory are used to generate the /boot/grub2/grub.cfg file and are taken as input by the grub2-mkconfig command. The /boot/grub2/grub.cfg file contains the menu entries and settings for the GRUB2 boot loader. The grub2-mkconfig command is used to create or update this file based on the scripts in /etc/grub.d and other configuration files. The scripts in /etc/grub.d are executed in numerical order and can be customized by the user or administrator. References: