Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dumps65

VMware 5V0-41.20 Dumps

Page: 1 / 4
Total 36 questions

VMware SD-WAN Troubleshoot Questions and Answers

Question 1

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

as

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.

What should the administrator check next?

Options:

A.

Verify if Path-MTU Discovery is disabled.

B.

Verify if there is latency, loss, or jitter on the underlay.

C.

Verify the Business Policy flows are matching.

D.

Verify if routes to Gateways are present in the Overlay Flow Control (OFC).

Question 2

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

as

Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is 45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.

How should the network administrator resolve the issue?

Options:

A.

Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.

B.

Advertise public routes to Office365 and Teams through the New York Hub.

C.

Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.

D.

Prevent the hub from advertising a default route.

Question 3

Scenario 2:

After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being cert configurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

as

A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.

What caused this behavior?

Options:

A.

The administrator failed to specify the Edge Type as a VeloCloud Cluster.

B.

This is an expected behavior.

C.

The device is faulty and will need a replacement.

D.

The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.

Question 4

Scenario 1:

A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Exhibit.

as

as

The network administrator determines the issue preventing the Dallas Branch from coming online.

Refer to the Exhibit(s).

What must the administrator do for the Edge to communicate with the Orchestrator and other branches?

Options:

A.

Reverse the WAN Overlay configurations

B.

Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"

C.

Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet

D.

Create a User-defined WAN Overlay to bond both interfaces

Question 5

Scenario 3:

After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

as

The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.

What are two ways the uplink feature should be used in this scenario? (Choose two.)

Options:

A.

Set the uplink community to forward traffic to a group of neighbors.

B.

Direct all traffic to that neighbor designated as an uplink,

C.

Stop mutual redistribution of routes from underlay and overlay.

D.

Prevent the site in question from becoming a transit site.

Question 6

Scenario 2:

After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

as

After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.

How can this be prevented?

Options:

A.

Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.

B.

Segmentation is currently not supported on VeloCloud Edge.

C.

Create two subnets, one for Guest wireless traffic and another one for Production traffic.

D.

Have Guest wireless and Production traffic in the same segment but different VLANs.

Question 7

Scenario 3:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

as

The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.

Where should the administrator check first to verify if the configuration is correct?

Options:

A.

Verify that the NVS feature is enabled in Cloud VPN.

B.

Verify that redistribution between the primary hub site and San Jose is enabled.

C.

Verify the static routes to San Jose from all Branches are configured.

D.

Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.

Question 8

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

as

A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.

What could be the possible reason?

Options:

A.

The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.

B.

On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.

C.

The licensing does not support multiple overlays on a single physical interface.

D.

Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.

Question 9

Scenario 2:

After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

as

The tunnel from the Dallas site to the Seattle hub is not coming up.

What are two things that should be checked to determine the issue? (Choose two.)

Options:

A.

Hub WAN Interface might be behind a firewall.

B.

Spoke Edge and Hub Edge have a mismatched certificate.

C.

Dynamic Branch to Branch is not enabled.

D.

Spoke Edge and Hub Edge are two different Edge models.

Question 10

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.

Exhibit.

as

A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.

What are two effective ways the administrator can accomplish this? (Choose two.)

Options:

A.

Modify the AS Path in New York to be shorter for 10.20.11.0/24.

B.

In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.

C.

Modify the AS Path in New York to be longer for 10.20.11.0/24.

D.

In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.

Page: 1 / 4
Total 36 questions